Setting up the Yurt
Errecting the yurt is a simple and straight forward procedure, but key to setting it up is to first mark out a circle on the ground. This can be done by using a round groundsheet (extra) which sets the perimeter for you, or marking a circle using a couple of tent pegs and rope to scribe a circle on the ground.
The next  step is to open out the two wall sections, connect them together and to the door frame. Make sure the wall height is the same all the way around.

Fit two roof poles to the wall and into the roof ring and then raise the ring and add a third roof pole to create 3 equally spaced poles around the yurt. Tie the tension band to the top of the door frame upright and wrap it all the way around the top of the wall and tie to the other door frame upright. Tighten the tension band untill the poles are snug in the roof wheel and then fit the remaining poles. Finally fit the wall and roof canvas.

Ready to Go Yurts - Pricing

12ft Yurt - $2,200.00
Internal area - 113 sq ft,  Wall height - 4ft 8",  Roof height - 7ft 8"
Roof Canvas,  Wall Canvas - 12oz untreated.
Options: Sunforger Marine Canvas traeted for mildew, mold & water resistance, add $200

14ft Yurt - $2,600.00 
Internal area - 153 sq ft,  Wall height - 4ft 8",   Roof height - 8ft
Roof Canvas,  Wall Canvas - 12oz untreated
Options: Sunforger Marine Canvas traeted for mildew, mold & water resistance, add $250

16ft Yurt - $2,900.00
Internal area - 217 sq ft,  Wall height - 4ft 8",  Roof height - 8ft 6"
Roof Canvas,  Wall Canvas - 12oz untreated
Options: Sunforger Marine Canvas traeted for mildew, mold & water resistance, add $300

Accessories - see parts page for more info
• Roof Dome - 38" Clear Polycarbonate dome with fixing kit.
• Umbrella - Clear 42" to cover ring when it rains and at night.
• Umbrella Rod - to secure the Umbrella to the ring.
• Pole End Band - to protect the roof canvas at the ends of the poles -
  extends the life of the roof.
• Groundsheet